3 installing the client software, 1 install client software, 2 addition of dvr server – CNB BDS4812 (discontinued) User Manual
Page 39
39
BDx-Series Installation
3.3 Installing the Client Software
3.3.1 Install Client Software
Minimum Requirements
- Processor: Intel Pentium III 800MHz or higher
- Main Memory: 128MB or higher
- Video Card (32MB or higher): Recommended ATI series video card
- OS: Windows 98/ME/2000/XP
Run the client program, and the screen shown below will appear. Continue the process to
complete installing the program in the local computer. The default installation folder is
“C:\Program Files\DVRClient”.
If the client program has been already installed, a dialog box asking whether to remove the
existing program will be displayed. Click “OK” to remove the existing program. After the
existing program is completely removed, run the client program again.
Click “Finish” to finish the installation. Then, the following icon will be created on the Desktop.
3.3.2 Addition of DVR Server
Register DVR systems at Client software to connect the DVR system at remote place.
Refer 5.2 network configuration and connecting.