CNB BDS4812 (discontinued) User Manual
Page 46
46
BDx-Series Installation
Click the “ADD” button after type Server name, Site code(100-001), Server IP address, User ID,
User password. And click the “SAVE” button to save the information.
Server name
Input name in order to identify server.
Server
description
Input more detailed information on server.
Site code
If this access code is different from the access code of the server to be
connected, access is rejected. (Default is 100-001)
Server
IP address
This is an item where internet address of server is inputted. Input IP address
or domain name.
User ID
This is an item where user ID registered on server is inputted. If there does
not exist user ID inputted on the server for connection, access is rejected.
User password
This is an item where password for the already inputted user ID is inputted.
You can change network TCP and UDP port number from “DETAIL SETUP”. But, recommended
to leave as default. (Refer to the software user manual.)
Clicking and selecting the server to be connected from list make change to
status.
Click “CONNECT” button in order to connect selected servers in regular sequence.