Alpine IXA-W407 - Manual (Page 20)

18
-EN
General Setup Operation
1
Press and hold SETUP for at least 2 seconds.
The SETUP selection screen is displayed.
2
Touch [ ] of General Setup.
The GENERAL SETUP screen appears.
3
Touch [ ], [ ] or [ ] etc., of the desired item to
change its setting.
Setting items:
Calendar Adjust / Clock / Clock Adjust / T/ZONE / Clock Mode /
Daylight Saving Time / Beep / Auto Scroll / Language Select /
LED Dimmer Level
4
Touch [ ] to return to the previous screen.
Touch and hold [ ] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
• Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Setting item: Calendar Adjust
Further setting items: Year / Month / Day
Setting contents: 2008-2099 / 1-12 / 1-31
The clock indication on the monitor display is turned on or off
respectively.
Setting item: Clock
Setting contents: OFF / ON
Setting item: Clock Adjust
Further setting items: Hour / Minute / Time Adjust
Setting contents: 0-23 / 0-59 / RESET
Adjustment becomes necessary when the “World Clock Display” of
Multi Information Function is used, refer to page 12.
Setting item: T/ZONE
Select the time zone of your district. For the time zone, refer to “List of
World Clock” (page 60).
• Touch and hold [ ] or [ ] will change the setting contents
continuously.
Setting item: Clock Mode
Setting contents: 12/24
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
Setting item: Daylight Saving Time
Setting contents: OFF / ON
General Setup
To display the General mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the General mode operation has
been released. Engaging the parking brake can reactivate the
General mode, as long as the car’s ignition has not been turned
off. It is not necessary to repeat the above procedure (1 through
3) of “To display the General mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the General mode screen.”
The following steps 1 to 4 are common operations to each
“Setting item” of General Setup. Refer to each section for
details.
Setting the Calendar
Year: Adjust the year.
Month: Adjust the month.
Day: Adjust the day.
Displaying the Time
Setting the Time
Hour: Adjust the hour.
Minute: Adjust the minute.
RESET: If the clock shows less than 30 minutes past, the
minute will be “: 0”; more than 30, the hour
advances.
Setting the Time Zone
Setting the Clock Display
Setting Daylight Saving Time
OFF: Returns to the ordinary time.
ON: Places the Summer Time mode ON. The time advances
by one hour.