When using the remote control, Battery replacement – Alpine IXA-W407 User Manual

Page 61

Advertising
background image

59

-EN

/

Button

Audio Processor Button

Press the button to display AUDIO SETUP screen.
Press the button to display A.PROCESSOR list screen when
the external audio processor is connected.*

* For the operation of external audio processor, refer to the Owner’s

Manual of the external audio processor you purchased. When the
IMPRINT-BOX (PXA-H100) (sold separately) is connected, refer to
“IMPRINT Operation (Optional)” on page 31
.

Power Button

Press this button to turn the power on/off.

Band Button

Radio mode: To change the band.
Changer mode: To change the disc.

UP Button

Button

Radio mode: Pressing this button will select, in descending
order, stations programmed into the radio’s presets as
shown below.

...

Mute Button

Press this button to lower the volume by 20 dB instantly.
Press this button again to cancel.

When Using the Remote Control

• Point the remote control at the remote sensor within

about 2 metres.

• It may not be possible to operate the remote control if

the remote control sensor is exposed to direct
sunlight.

• The remote control is a small, lightweight precision

device. To avoid damage, short battery life,
operational errors and poor response, observe the
following.
- Do not subject the remote control to excessive

shock.

- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.

Battery Replacement

Applicable battery: Use two “AAA” sized dry batteries or equivalent.

1

Opening the battery cover

Slide out the battery cover while firmly pressing in the
direction of the arrow.

2

Replacing the battery

Insert the batteries, observing the polarities as illustrated.

3

Closing the cover

Slide the cover as illustrated until a click is heard.

Radio mode:

Chooses the tuning mode.
By pressing it more than 2 seconds,
Automatic Memory will be operated.

SAT mode:

Switches between CH No. and CH name.

MP3/WMA/AAC iPod mode:

Switches between play and pause.

Radio mode:

SEEK (UP) button

SAT mode:

Channel (UP) button

MP3/WMA/AAC iPod mode:

Press the button to advance to the
beginning of the next file.

Changer mode: Press the button to advance to the

beginning of the next track/file. Press and
hold to fast forward.

Changer mode:DISC Select (DN) button

Press this button to select a disc in
descending order.

MP3/WMA/AAC mode:

Switches Folder/Playlist/Artist/Album/Genre/
Composer.

iPod mode:

Switches Playlist/Artist/Album/Genre/
Composer/Episode.

Warning

DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.

Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.

Advertising