Alpine IXA-W407 User Manual

Page 74

Advertising
background image

72

-EN

When Connecting External Equipment

To Video Output terminal

System Switches

When connecting an equalizer or divider using Ai-NET
feature, place the two switches in the EQ/DIV position.
When no device is connected, leave the switches in the
NORM position.

Do not make the two switches to different settings.
Be sure to turn the power off to the unit before changing the switch

position.

24 PIN Pre-out/AUX I/O Connector

Video/Audio Output Connectors (AUX OUTPUT)

Use when connecting an optional monitor etc.

Video/Audio Input Connectors (AUX INPUT)

Video/Audio Input Connectors (AUX INPUT)

Camera extension cable (Included with Rear Camera
(HCE-C107D))

Monitor Control Lead (White/Pink)

Connect this to the Monitor Control Lead of the touch panel-
compatible rear monitor.

Remote Control Output Lead (White/Brown)

Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.

Remote Control Output Lead (White/Brown)

Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.

Remote Control Input Lead (White/Brown)

Reverse Lead (Orange/White)

Use only when a back-up camera is connected. Connect to
the plus side of the car’s reverse lamp. This lamp illuminates
when the transmission is shifted into reverse (R).
With this lead properly wired, the video picture
automatically switches to the back-up camera whenever the
car is put into reverse (R).

RCA Extension Cable (Sold Separately)

CAMERA Input RCA Connector

Use when connecting a back-up camera with RCA Output
Connector.

Direct CAMERA Input Connector

Use when connecting a special rearview camera

HCE-C107D is connected.

Remote IN/OUT Connector

To Audio Output terminal

To Audio Output terminal

Back-up camera
(Sold Separately)

TV Tuner or VCR
(Sold Separately)

(White/Pink)

M.CONT

M.CONT

(White/Pink)

(White/Brown)

REMOTE OUT 2

(White/Brown)

REMOTE IN

REMOTE OUT

(White/Brown)

(Orange/White)

REVERSE

Use only when back-up camera is connected.

* Connect this to the touch panel-compatible rear monitor.

To Audio Input terminal

Rear monitor

(Sold Separately)

TV Tuner or VCR
(Sold Separately)

To Video Input terminal

To Video Output terminal

REMOTE IN 1

(White/Brown)

Rear camera

(sold separately)
HCE-C107D

(White/Brown)

REMOTE OUT 1

REMOTE IN 2

(White/Brown)

To Video Output terminal

Advertising