CNB SDF1212 - Manual (Page 14)

14
3. SETUP
The following sections detail the initial setup of the DVR
3-1. Entering SETUP
When you press the SETUP button, the DVR will ask for a password. The default password is 1111, which
can be entered by pressing the up button ( ) 4 times and then pressing the SEL button. We
recommend you protect the system by assigning a new password immediately. The procedure for assigning a
password is found in section 3.4 . After a password has been assigned, enter the password by using the 4
direction keys (representing 1, 2, 3, & 4), and then press the SEL button for password validation. Once the
password is entered, you will see the screen as shown in Figure 3.1.1. Navigate through the menu items and
press the SEL button to enter the sub-category menu.
Figure 3.1.1. Setup menu screen