CNB SDF1212 - Manual (Page 25)

25
DHCP
Select DHCP to use the DHCP option when connecting the DVR to a network. An IP address is automatically
assigned by the DHCP server, which assigns IP address and other parameters to new devices automatically.
To see the DVR’s IP address, select DESCRIPTION from the SYSTEM menu.
If the network connection does not allow additional IP addresses, then an IP sharing device will be needed. In
this case, forwarding may be needed to allow for a network connection. For more information on port
forwarding, see the documentation for your IP sharing device or your network administrator.
Figure 3.5.3. Network setup screen - DHCP
ADSL
To use the ADSL option when connecting the DVR to a network, the following information is required. If you
do not have this information, see your network administrator.
Figure 3.5.4. Network setup screen - ADSL