CognitiveTPG B780 - Manual (Page 12)

Chapter 2: About the Printer and Imaging
B780 UG00001 B 10/06 B780 Two-Color Thermal/Impact Hybrid Printer: User Guide
7
Printer and Imager Specifications (continued)
MICR Reader:
Character sets/fonts E-13B and CMC-7, auto discriminate (Integrated in slip station)
Check Read Rate 99% minimum
Parsing Formats E-13B only. Programmable to any format
Physical B780 Base Unit
Dimensions (W x D x H) 6.5 in. x 11.4 in. x 6.6 in. (165.10 mm x 289.56 mm x 167.64 mm)
Weight Approximately 8 pounds
Power Requirements 24 VDC, 3 Amps.
Physical B780 Base Unit with Imaging
Dimensions (W x D x H) 6.75 in. x 13 in. x 6.75 in. (171.45 mm x 205.74 mm x 171.45 mm)
Weight Approximately 9.25 pounds
Power Requirements 24 VDC, 3.2 Amps. Either of the power module options (55W or 75W) offered for
the B780 base unit can be used.
Software and Firmware Capability
Emulations Available Application Compatible Escape Commands (ACEC), TPG DH, ColorPOS ® ,
Receiptware ready
Data Buffer 8K
User Memory 2 to 12 MB:
shared for graphics, logos, user defined characters, user data storage, and
electronic journal
Communication Board Architecture supports:
Dual 9-Pin RS232/USB, 25-pin RS232, Ethernet, Powered USB
Printer Drivers OLE POS for Windows compatible and Windows 2000,
Java POS, USB
Thermal Paper Requirements:
Paper Type Direct Thermal, POS Grade(s), special requirements for color printing (see Ch 6)
Paper Roll (W x Dia.) 3.15 in. x 3.27 in. (80 mm x 83 mm)
Impact Slip Forms Requirements:
Size 2.75 in. x 5.00 in. (69.85 mm x 127.00 mm) minimum front & side
Maximum Length 11.00 in. (279.4 mm)
Number of Plies 1 - 4 ply multipart
Paper Thickness 0.014 in. maximum (0.35 mm)