Inserting checks or cards for imaging (scanning) – CognitiveTPG B780 User Manual

Page 37

Advertising
background image

32

B780 Two-Color Thermal/Impact Hybrid Printer: User Guide

B780 UG00001 B 10/06

Chapter 4: Using the Printer

Inserting checks or cards for imaging (scanning)

Place the checks or cards or other media on the top slip table as shown in the figure below for imaging only.

Slide the media straight forward into the feed rolls until the green slip in light on the top of the printer comes on

Note

The MICR line of a check cannot be read by the MICR reader in this position.

1

2

Front Cover

Lower Slip table

1

2

Front Cover

Lower Slip table

Top Slip table

Cards

Inserting checks for imaging and check verification

If the MICR line of a check must be verified (read) before scanning, then the check must be inserted at the lower

slip table.

Note

Cards or thick media cannot be inserted at the lower slip table. Slide the media forward and to the right until the
green slip-in light comes on. Then, hold the media to the right and release it as soon as the printer begins to run.

Advertising