CognitiveTPG CRx User Manual
Page 17
13
Chapter 2: Getting Started
Printer Power Test
The power supply indicates power with a green light. The next step verifies the printer
is receiving power.
Press the power switch (D in Figure 2-17 below) to the ON position.
NOTE: THE POWER LIGHT ON THE TOP USER INTERFACE COVER TURNS GREEN TO
INDICATE THE UNIT IS RECEIVING POWER.
THE READY LIGHT FIRST TURNS RED, THEN AUBURN, THEN GREEN WHEN THE PRINTER IS
READY TO PRINT.
Figure 2-17: Powering ON the C Series Printer
Device
Primary Function
Use
A - POWER light
Shows power status
ON – printer on and ready to print
OFF – no power applied
B - READY indicator Shows printer status
GREEN – printer ready to accept data
RED – printer error, empty media roll, or paused opera-
tion during batch mode processing
OFF – no power applied
C - FEED button
Advances print media
Press to advance media
Press and hold while turning unit on to initiate self test
and print current configuration
D - ON/OFF switch
Controls printer power
Press to turn printer on and off
NOTE: (CXI PRINTERS ONLY) THE LCD BRIEFLY DISPLAYS PRESS RIGHT ARROW FOR
MENU. THEN THE LCD DISPLAYS COGNITIVE CXI FOR ABOUT ONE SECOND. WHEN THE
PRINTER IS READY TO PRINT, THE LCD DISPLAYS COGNITIVE. (SEE Figure 2-18 BELOW).
Figure 2-18: CXI Printer LCD Display when Printer is Powered ON