Optional network connection – Controlled Products Systems Group AE-1000PLUS User Manual

Page 15

Advertising
background image

15

Optional Network Connection

Linear’s AE1000Plus, AE2000Plus, & AM3Plus Access Control Systems
can be connected together in a network. A network will allow sharing
programming and user information between the systems. Program each
unit to a different network Node Address (see Page 19).

IMPORTANT COMPATIBILITY NOTE: Linear’s previous

access control Models AE-1000, AE-2000, & AM3 can be used in
networks with the Models AE1000Plus, AE2000Plus, & AM3Plus
only using AccessBase2000 software. The built-in AXNET
Browser Interface included in the “Plus” models is only compatible
with the Models AM3Plus, AE1000Plus, and AE2000Plus.

Network Confi gurations for AXNET Programming

If the system is going to be programmed using Linear’s AXNET Browser
Interface, units can communicate with each other on the network through
modems or RS-485 cable connections.
Refer to the fi gure below for details of the 11 supported AXNET network
hardware confi gurations and associated Network Confi guration Numbers.
After choosing a network layout that best suits the installation, note the
Network Confi guration Number. This number is required to be entered
during setup of the AXNET Browser Interface in the Global Settings for
Networking area.

NETWORK

CONFIGURATION #1

SINGLE

UNIT (NODE)

RS-485 CABLE CONNECTION

MODEM TELEPHONE CONNECTION

MASTER UNIT #1 ALWAYS
REQUIRES A MODEM FOR

REMOTE PROGRAMMING

#1

#1

#2

#1

#2

#1

#2

#3

#1

#2

#3

#1

#2

#3

#1

#2

#3

#4

#1

#2

#3

#4

#1

#2

#3

#4

#1

#2

#3

#4

#1

#2

#3

#4

NETWORK

CONFIGURATION #2

TWO RS-485

NODES

NETWORK

CONFIGURATION #3

TWO MODEM

NODES

NETWORK

CONFIGURATION #4

THREE RS-485

NODES

NETWORK

CONFIGURATION #5

TWO RS-485 NODES,

ONE MODEM NODE

NETWORK

CONFIGURATION #6

THREE MODEM

NODES

NETWORK

CONFIGURATION #7

FOUR RS-485

NODES

NETWORK

CONFIGURATION #8

THREE RS-485 NODES,

ONE MODEM NODE

NETWORK

CONFIGURATION #9

2X TWO RS-485 NODES,

TWO MODEM NODES

NETWORK

CONFIGURATION #10

TWO RS-485 NODES,

TWO MODEM NODES

NETWORK

CONFIGURATION #11

FOUR MODEM

NODES

MODEM

UNIT

AXNET COMPATIBLE NETWORK CONFIGURATIONS

Advertising