Controlled Products Systems Group ICON26 - Manual (Page 28)

27
Icon Page
AREA CODES
In special applications, it is necessary to enter area codes for Resident Phone Numbers. Area codes are
entered from the Phone Number screen ( fig a.).
Use the key to enter the area code and prefix field ( fig b.). The Prefix defaults to “1” for normal
11-digit dialing. Where necessary, you can change the prefix to any number. To choose 8, 9, or 10-digit
dialing, when no prefix is needed, press while in the prefix field. Then type the required
number of digits in the area code field followed by the phone number. Press the key to
continue with the entry as described in the “Resident Information” section.
To erase “Resident” information, press the key. Press the key for assistance.
( fig a.)
005 PHONE NUMBER:
_-___-___-____
( fig b.)
005 PHONE NUMBER:
1-___-___-____
PREFIX FIELD AREA CODE FIELD
IMPORTANT NOTE: While in the help screens, programming will be disabled.
To continue programming, press the button to exit the help screens first.