Controlled Products Systems Group ICON26 - Manual (Page 32)

31
Icon Page
CLOCK/TIMER CONTINUED
•
•
•
Setup New Timers> N
View/Edit Timers>
Use to view and program timer(s) for
Sunday through Saturday. Move the cursor
to time and type in the setting. Two timers can be set
for each day of the week following the procedure below.
( fig a.)
Press to turn timer 1 ON or press to
turn timer 1 OFF. Press the key. Type the
desired timer 1 setting. For am type For pm
type Press to program the timer 2.
N F
A
P
2./ 3. DOOR AND GATE TIMERS
SUN G Tmr1: ON F=off
07:00am -> 05:00pm
( fig a.)
SUN G Tmr2: ON F=off
07:00am -> 05:00pm
SAT G Tmr1: ON F=off
07:00am -> 05:00pm
SUN G Tmr1: ON F=off
07:00am -> 05:00pm
( fig c.)
( fig b.)
MON G Tmr1: ON F=off
08:00am -> 04:30pm
USE ARROWS TO VIEW / PROGRAM
INDIVIDUAL TIME ZONES
See next page for instructions
To program the second timer, repeat the above procedure. Press the key when complete.
Press to program Gate Timers Menu. Press to program the Door Timers Menu.
2 3
Program timers 1 and 2 for any day of the week ( fig b. & c.)
To exit “Timers” screen, press the key. Press the key for assistance.
IMPORTANT NOTE: While in the help screens, programming will be disabled.
To continue programming, press the button to exit the help screens first.