Controlled Products Systems Group ICON26 - Manual (Page 33)

32
Icon Page
CLOCK/TIMER CONTINUED
2./ 3. DOOR AND GATE TIMERS, continued’
GATE Tmr1: ON F=off
__:__am -> __:__pm
COPY Timers1,2 To
Workdays(y) Sun(n)
PRESS TO PROGRAM SETS OF
TIME ZONES
Timer 1 & 2 settings can be copied to any day(s) of the
week. Select the day(s) of the week to be copied.
Press to select day or press to not
select day of week. Press when complete.
( fig e.)
Y N
GATE Tmr2: ON F=off
__:__am -> __:__pm
( fig d.)
( fig e.)
COPY Timers1,2 To
Mon(n) Tue(n) Wed(n)
COPY Timers1,2 To
Thr(n) Fri(n) Sat(n)
Setup New Timers> N
View/Edit Timers>
Press to program Gate Timer Menu Press to program the Door Timers Menu
2 3
See previous page for instructions
To program the second timer, repeat the above
procedure. Press the key when complete.
To exit “Timers” screen, press the key. Press the key for assistance.
IMPORTANT NOTE: While in the help screens, programming will be disabled.
To continue programming, press the button to exit the help screens first.
Press to turn timer 1 ON or press to
turn timer 1 OFF. Press the key. Type the
desired timer 1 setting. For am type ,For pm type
. Press to program the timer 2.
N
N
F
A
P
Program timers 1 and 2 for any day of the week ( fig d.)