Nilfisk-ALTO PM-6 DRAGONFLY - Manual (Page 13)

4.11 The Power Supply Box
- POWER CORD
You can connect the plug of POWER CORD to the mains. Please check the voltage accepted by the unit and
the voltage available from your AC sockets before connecting the unit to the mains.
- DC OUTPUT
You can connect the cable from DC OUTPUT to POWER IN on rear panel. Thus, the power supply box will provide
±
24V DC voltage to your mixing console.
- POWER Switch
This switch turns the Mixing console ON and OFF. When you turn on the Mixing console, both the power indicator
In the box and the power indicator(18) on the panel will light on.
- FAN
The fan can accelerate the flow of air to lower the temperature inside power supply. The inside temperature determines
the fan speed which controls the inside air flowing speed.
DC OUTPUT
POWER
ON
OFF
37 36 35
34
34
35
36
37
12
AC INPUT 210-240V 50Hz
POWER CONSUMPTION 130W