Nilfisk-ALTO PM-6 DRAGONFLY - Manual (Page 16)

Modification on mono and stereo channels
6. FOR THE EXPERTS WHO WANTS TO KNOW MORE
Before
Disconnect
the POST route
Aux
(PRE)
POST
After
Aux
(PRE)
POST
Solder the PRE route
As we have told you previously in this manual, the Aux Send Control both on mono and stereo channels is factory
wired as POST-FADER. If you are skilled in electronic components soldering you can modify this setting and have
all your AUX sends configured as PRE-FADER.
15