Nilfisk-ALTO PM-6 DRAGONFLY User Manual

Page 5

Advertising
background image

Thank you very much for expressing your confidence in

LTO products by purchasing PM-6 DRAGONFLY 6-Channel

Mixing Console with Digital Effects. The PM-6 is a professional compact mixer, which Provides the state of the art digital
amplifier technology specifically. You will get the smooth, accurate more natural and open sound from this apparatus,
and it is really ideal for small gigs, recording and fixed PA installations. The PM-6 DRAGONFLY 6-Channel Mixing
Console with Digital Effects is packed with features that can not be found in other consoles of it size: 2 mono (these
are provided With ultra low noise microphone preamplifiers and Phantom Power at +18 Volt) and 2 stereo input
channels, and each of them is provided with a 3 bands equalizer for HI, MID and LOW controls; built-in high efficiency
power amplifier and effects processor; highly accurate 6-segment bar graph meters and 2-Track inputs assignable
to main mix, control room / headphone outputs.
Your PM-6 DRAGONFLY is very easy to operate but we advise you to go through each section of this manual carefully.
In this way you will get the best out of your PM-6 DRAGONFLY.

1. INTRODUCTION

3.1 There is a small black box provided with your PM-6 DRAGONFLY. This is the specific power supply box. Connect

the proper terminal into your PM-6 DRAGONFLY and the power supply box into an AC socket.

3.2 Be sure the main power switch is turned off before connecting the Mixer to the power supply box. Also, you should

make Sure that all Input and Output Controls are turned down. This will avoid damages to your speakers and avoid
excessive noise.

3.3 Before connecting and disconnecting the power supply box always turn off your external power amplifier (if used

in a sound system).

3.4 Do not use solvents to clean your PM-6 DRAGONFLY. A dry and clean cloth will be OK.

3. READY TO START

2. FEATURES

The PM-6 DRAGONFLY 6-Channel Mixing Console with Digital Effects is designed for professional application. It
provides the following features:

Built-in high efficiency power amplifier and digital effects processor

2 MIC input channels with gold plated XLR and balanced LINE inputs

2 stereo input channels with balanced TRS jacks

Ultra-low noise discrete MIC pre-amps with +18V phantom power
Extremely high headroom offering more dynamic range

Warm, natural 3-band EQ on each channel
Peak LED on each channel
AUX control per channel for external and internal onboard effect.

2-Track inputs assignable to main mix, control room / headphone outputs
Highly accurate 6-segment bar graph meters

DYNAMIC POWER:2

80W@4Ohm

4

Advertising