Impulse MAQ20-940 Quick Start Guide - Manual (Page 12)

MAQ
®
20 Quick Start Guide
8
3.3.3 Configuring the MAQ20 Voltage Output Module
To access the configuration and perform basic operations for the Voltage Output module, select
any cell in the row where the MAQ20-VO module is listed and then click the Configure Module
button. The following configuration window will open.
Figure 6: MAQ20-VO Configuration Window
The range for each of the output channels is selected using the drop down boxes under the Range
heading. To change the voltage being output from a particular channel, use the up and down
arrows next to the Voltage Out display box or type the desired value in the Voltage Out display
box and press enter. The Voltage Output module has the capability to output data sequences and
waveforms using buffer writes of data from this configuration window or from files. Refer to the
MAQ20-VO Hardware User Manual for details.