Impulse MAQ20-940 Quick Start Guide - Manual (Page 15)

MAQ
®
20 Quick Start Guide
11
If the system is connected via Ethernet, ensure the TCP/IP Port radio button is selected. For initial
connection leave the TCP/IP Address unchanged. The host computer Ethernet port must be
configured with a fixed IP Address of 192.168.xxx.xxx, which does not match the static IP Address
of the MAQ
®
20 and Subnet Mask of 255.255.0.0.
Press the Connect button. If connection is successful, the message
“Communication: Connected”
will appear at the bottom left area of the window.
To communicate with the system, use Run or press the Play button on the top menu bar. The
Scan activity progress bar will scroll at the bottom of the window showing active communications.
Select the Analyze Panel to view active readings from installed Analog Input modules.
Figure 9: Analyze panel
For further details on software operation and functionality, refer to the ReDAQ Shape for MAQ
®
20
User Manual.