Impulse MAQ20-940 Quick Start Guide - Manual (Page 8)

MAQ
®
20 Quick Start Guide
4
3.3.1 Establishing Communication with the MAQ
®
20 System
IMPORTANT: If the MAQ
®
20 system is to be used with a USB connection to the host computer,
ensure that the USB driver provided on the Dataforth website has been installed before connecting
the system to the host computer. Refer to Section 3.2 for details.
Apply power the MAQ
®
20 system and ensure it is connected to the host computer over the
interface chosen. Double click the MAQ20 Config SW Tool icon on the desktop. Once started,
the initial screen displays with the View Pane disabled, indicating that the application is not yet
connected to the MAQ
®
20 system, reference Figure 2.
Figure 2: MAQ20 Configuration Software Tool Window, View Pane Disabled