Avid Technology DIGI 1 - Manual (Page 25)

Chapter 3: Windows 98 Configuration 21
To install the demo sessions:
1 Insert the Pro Tools LE Installer CD in your CD-ROM drive. A window opens displaying
the CD-ROM contents.
2 Open the “Pro Tools Demo Installer” folder and double-click the Setup program.
3 When the installer opens, click Browse to set the Destination Folder to your audio drive,
then click Next.
4 Select the install components for the “SoundCheck Session” and “Be There Session.”
5 Click Next to install the demo sessions.
Removing Pro Tools LE and the Digi 001 Wave Drivers
If for some reason you need to remove the Pro Tools LE software, you can do so from the
Add/Remove Program Control Panel. You can also, if desired, remove the Digi 001 wave
driver from the System Control Panel.
To remove Pro Tools LE from your system:
1 Choose Start > Settings > Control Panel.
2 Double-click Add/Remove Programs.
3 From the list of programs, select Pro Tools LE and click Add/Remove.
4 If the UnInstall Shield prompts you to remove shared files, click Yes to All.
5 Select Digidesign System Files from the list of programs and click Add/Remove.
6 Close the Add/Remove Programs Control Panel.
7 Restart your computer.
To remove the Digi 001 wave driver:
1 From the desktop, right-click My Computer and choose Properties.
2 In the System Control Panel, click the Device Manager tab.
3 Locate and select the Digi 001 device, then click Remove.
4 When prompted, confirm you want to remove the device.
5 Close the System Control Panel.
6 Using Windows Explorer, locate and delete the following file:
Windows\Inf\Other\DigidesignDALWDM.inf
7 Restart Windows.