Avid Technology DIGI 1 - Manual (Page 29)

Chapter 4: Connecting Your Studio 25
chapter 4
Connecting Your Studio
This chapter explains how to connect your Digi 001 to a mixer, amplification system,
digital recorders, and other studio devices, and how to connect audio sources for recording.
Digi 001 I/O Box Inputs and Outputs
All Digi 001 inputs and outputs are factory calibrated for 14 dB of headroom below 0 dB, or
full code. This means at the nominal reference input level (+4 dBu or –10 dBV) you can
have up 14 dB of headroom before input or output clipping occurs.
Connectors on the Digi 001 I/O Box Front Panel
Mic/Line Inputs 1 and 2
These balanced/unbalanced inputs are designed for microphones or line-level inputs (with
the –26 dB pad). They accept XLR or 1/4" analog audio input connections.
–26 dB Pads 1 and 2
These switches allow you accommodate line-level signals on Mic/Line Input 1 and 2 by
reducing input sensitivity by –26 dB.
Input Gain 1 and 2
These controls adjust the input gain of Mic/Line inputs 1 and 2.
Mic/Line input 1
with preamp
48V phantom
power
–26 dB
pad
input
gain phantom power
Monitor Mode
switch
monitor
volume
headphone
gain
headphone
output indicator
Mic/Line input 2
with preamp
–26 dB
pad
input
gain power on
indicator