Avid Technology DIGI 1 - Manual (Page 35)

Chapter 4: Connecting Your Studio 31
To connect a home stereo:
1 Connect 1/4" cables to the Monitor outputs on the back of the Digi 001 I/O Box.
2 Connect the outputs to an available pair of left and right inputs on your stereo.
✽ Home stereo systems often use RCA connectors. You can use an adaptor or a
special cable to convert from the 1/4" connectors used by Digi 001 to the RCA
connectors on your home stereo.
To connect monitor speakers with a power amp or self-powered monitor speakers:
1 Connect 1/4" cables to the Monitor outputs on the back of the Digi 001 I/O Box.
2 Connect the outputs from Digi 001 to the left and right power amp inputs, or to the left
and right self-powered speakers.
Connecting a Recorder for Mixdowns
After you record and mix your sessions using your Digi 001, you may want to mix them
down to a DAT, audio cassette, or other stereo 2-track machine.
Connecting an Analog Deck
Connect your recorder (cassette deck or other analog device) to the Main outputs on the
back of the Digi 001 I/O Box. L/1 connects to the Left input of your recorder, and R/2
connects to the right input. These outputs are 1/4" TRS jacks. You may need adapter cables
if your mixdown deck has RCA inputs.
monitor outputs
left and right
Main outputs