Atlas Sound AA120M - Manual (Page 21)

Specifications are subject to change without notice
AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
©2006 ATLAS SOUND LP Printed in U.S.A. 00106 ATS002179 RevA 01/06 PP
OWNER'S MANUAL AA120M MIXER AMPLIFIER
21
WIRING THE AA120M
Speaker Outputs - Use 2 conductor unshielded wire of the appropriate gauge. If you are unsure
about this, contact Atlas Sound Tech Support at 1-800-876-3333. Make sure you know how many
speakers you need and what tap value you intend to use.
Mic/Line Input - Use 2 conductor w/ shield for low level signals of 20-22 gauge is best. Maintain the
proper polarity, + to +, – to –, and shield to ground. For unbalanced signals, connect the (G) to the (–)
terminal.
Unbalanced Inputs and Outputs - Pre-made RCA cables can be purchased from vendors to simplify
interconnection to external devices.
Zone 2 Out - Use 2 conductor, 20-22 gauge, shielded is best. Terminate the shield at the input to the
device if possible.
Security Plug Installation
SECURITY COVER OPTION
In order to prevent unauthorized operation of the AA120M, optional security covers are available which
take the place of the front panel knobs. After the AA120M has been installed and is operating as desired,
grasp the front panel knobs and pull straight out from the front panel. Replace the knobs with security
covers, Atlas Sound part number AAVCC-5, available in quantities of 5.
   
 
Signal Power
On
Off
Peak
Input 6 Input 5 Input 4 Input 3 Input 2
     
n
Bass Treble
 
n
Input 1
Master
Power
77'(&CC_n[h7cfb_\_[h
Front Panel
Knob
Security Cover
or