Luminex FLEXMAP 3D Hardware User Manual - Manual (Page 23)

Electronics
The electronics system provides the power for operation and control of the FLEXMAP 3D
system and communication between its parts.
Power Input Module
The power input module contains the input power plug and fuses. This is the protective
earthing point for the FLEXMAP 3D system. The mating power cord connector type is
IEC-320-C13. The mating power cord provides electrical power to the instrument when it is
connected to an electrical outlet and is the means of disconnection. The power input auto-
senses the voltage range. See the "Back of the FLEXMAP 3D Instrument" image below.
WARNING: Do not obstruct this means of disconnection. Connect only to
outlets that contain protective earthing. Before changing a fuse,
turn off the instrument and unplug the power cord to avoid any
danger of electrical shock.
Communications Ports (USB Type B Connector)
The communications port connects the Luminex ® FLEXMAP 3D ® instrument to the computer.
See the "Back of the FLEXMAP 3D Instrument" image below.
FIGURE 8. Back of the FLEXMAP 3D Instrument
FLEXMAP 3D ® Hardware User Manual
12