Setting console security, Figure 3.12: flag dialog box, Figure 3.13: set position flag – Avocent AutoView 1515 User Manual
Page 41
Chapter 3: Basic Operations
29
Figure 3.12: Flag Dialog Box
To determine how the status flag is displayed:
1.
Select Name or EID to determine what information will be displayed.
2.
Select Displayed to show the flag all the time or select Timed to display the flag for only five
seconds after switching.
3.
Select a flag color in Display Color.
4.
In Display Mode, select Opaque for a solid color flag or select Transparent to see the desktop
through the flag.
5.
To position the status flag on the desktop:
a.
Click Set Position to gain access to the Set Position Flag screen.
b.
Left-click on the title bar and drag to the desired location.
c.
Right-click to return to the Flag dialog box.
Figure 3.13: Set Position Flag
NOTE: Changes made to the flag position are not saved until you click OK in the Flag dialog box.
6.
Click OK to save settings.
-or-
Click X to exit without saving changes.
Setting console security
The OSCAR interface enables you to set security on your analog port console. You can establish a
screen saver mode that engages after your console remains unused for a specified Inactivity Time.