Avocent AutoView 1515 - Manual (Page 46)

34 AutoView 1415/1515/2015 Switch Installer/User Guide
Figure 3.16: Target Selection Dialog Box (Admin)
4. Select an AVRIQ or IAC module to view and click the Version button. The Target Version
dialog box displays. For more information on loading firmware, see Appendix A.
Figure 3.17: Target Version Dialog Box
5. Click the Load Firmware button to view the load firmware screen. The Load Firmware button
will not appear in the user version of the Target Selection Dialog Box.
NOTE: The Load Firmware button will only display for an AVRIQ module; IAC modules are not upgradable.
Only the administrator and the user (when local user accounts are disabled) can upgrade the firmware on an
AVRIQ module.