MAX HS90A - Manual (Page 11)

11
Accessory punch Spring Pin
w Remove the Switching Lever to the direction of the arrow.
Switching Lever
Spring Pin
NOTE:
When switching back CONTACT ACTUATION with ANTI-DOUBLE FIRE MECHANISM
to SINGLE ACTUATION, equip the Switching Lever facing “S” mark front with the
Spring Pin to the Trigger by reverse procedure.
● Use the steel blackening color Switching Lever
Confirm and use the designated original Switching Lever when carrying out the switching back procedure.
The use of Switching Lever other than the designated original one will cause serious accidents. (e.g., firing fasteners
just pulling trigger, etc.)
WARNING:
Cut Shape Flat Shape
HS90A HS90 (Previous model)
● Never install the Switching Lever to the HS90 (Previous model)
It will cause serious accidents. (e.g., firing fasteners just pulling trigger, etc)
Color Shape (1/1 scale) Tool
SINTERING STEEL
GREY METALLIC
NF550
SN883 with thin trigger
STAINLESS SILVER SN883 with thick trigger
STEEL BLACKENING HS90A