MAX HS90A - Manual (Page 7)

7
2. SPECIFICATIONS AND TECHNICAL DATA
1. NAME OF PARTS
2. TOOL SPECIFICATIONS
PRODUCT NO. HS90A
HEIGHT 12-3/4˝ (325 mm)
WIDTH 4-1/2˝ (114 mm)
LENGTH 11-3/4˝ (300 mm)
WEIGHT 6.0 lbs. (2.7 kg)
RECOMMENDED
12 to 23 bar (170 to 320 p.s.i.)
OPERATING PRESSURE
LOADING CAPACITY 26 to 32 Nails ×2
AIR CONSUMPTION
2.5Rat 18 bar (257 p.s.i.)
operating pressure
w
y
o u
i
q
r
e
!2 !0
t
!1
q Frame
w Cylinder Cap
e Contact Arm
r Nose
t Magazine
y Trigger
u Grip
i Exhaust Cover
o Trigger Lock Dial
!0 Plug
!1 Discharge Outlet
!2 Hook
3. FASTENER SPECIFICATIONS
MAX KCM PAPER
NAIL LENGTH TAPE COLLATED
2-3/8˝ to 3-1/2˝ (60 to 90 mm)
SHANK DIAMETER .113˝ to .162˝ ( φ2.9 to φ4.1 mm)
SHANK TYPE Smooth, Ring, Screw
HEAD DIAMETER .270˝ to .290˝ ( φ6.8 to φ7.4 mm)
RECOMMENDED OPERATING PRESSURE:
12 to 23 bar (170 to 320 p.s.i.). Select the operating air pressure within this range for best fastener performance.
DO NOT EXCEED 23 bar (320 p.s.i.).
4. TECHNICAL DATA
q NOISE
A-weighted single-event sound power level ------ LWA, 1s, d 96.42 dB
A-weighted single-event emission sound pressure level at work station ------ L p A , 1s, d 87.82 dB
These values are determined and documented in accordance to EN12549 : 1999.
w VIBRATION
Vibration characteristic value ＝ 4.89 m/s 2
These values are determined and documented in accordance to ISO 8662-11.
This value is a tool-related characteristic value and does not represent the influence to the hand-arm-system when using the tool.
An influence to the hand-arm-system when using the tool will for example depend on the gripping force, the contact pressure
force, the working direction, the adjustment of mains supply, the workpiece, the workpiece support.
5. APPLICATIONS
＊Floor and wall framing
＊Subflooring
＊Roof and wall sheathing
＊Fencing