MAX HS90A - Manual (Page 14)

14
DRIVING DEPTH ADJUSTMENT DIAL
ALWAYS disconnect air supply before adjustment dial.
q With air pressure set, drive nails into a representative material sample to determine
if adjustment is necessary.
w If adjustment is required, disconnect air supply.
e Refer to the mark on the contact arm for direction to turn the adjustment dial.
r Reconnect air supply.
TRIGGER LOCK MECHANISM
The tool is equipped with a trigger lock mechanism. Push and rotate the trigger LOCK
to the trigger UNLOCK position before driving nails.
WARNING: Adjustment
dial
Deeper Shallow
Trigger lock dial
Trigger
Deeper Shallow
(UNLOCK)
(LOCK)
TOOL HOOK
The Hook can be set two positions.
Hook