MAX PJID143 - Manual (Page 10)

10
3. SPECIFICATIONS AND TECHNICAL DATA
1. NAME OF PARTS (See Fig. A, B and C)
APLICABLE FASTENER SPECIFICATIONS
Machine Screw 4mm~8mm
Standard Bolt M5~M14
High Tensile Bolt M5~M12
Fig. A
1 SLEEVE PROTECTOR
2 TRIGGER SWITCH
3 WARNING LABEL
4 LED LAMP
5 BATTERY PACK JPL914
6 BELT HOOK
7 CARRYING STRAP
8 ROTATIONAL DIRECTION SWITCH
9 BRUSHLESS MOTOR
10 PROTECTOR
11 BIT
12 SCREW
13 SPECIFICATION LABEL
14 SERIAL NO. LABEL
Fig. B
15 PACK CAP
16 TERMINAL
17 VENTILATOR
18 LATCH
19 SPECIFICATION LABEL
Fig. C
20 BATTERY PACK ENTRY POINT
21
LED LAMP (ORANGE) CHARGING
STATUS INDICATOR LAMP
22
LED LAMP (RED / GREEN) CHARG-
ING STATUS INDICATOR LAMP
23 SPECIFICATION LABEL
24 VENTILATOR
25 CE (VDE) POWER PLUG
26 POWER CORD
2. TOOL SPECIFICATIONS <Tool> <Battery charger>
PRODUCT NO. PJID143
WEIGHT
1.45kg(3.2lbs.)
(Battery included)
HEIGHT 236mm (9-1/4")
WIDTH 82mm (3-1/4")
LENGTH 135mm (5-1/4")
RATED VOLTAGE /
BATTERY 14.4V, Li-ion Battery pack
JPL914
NO-LOAD SPEED 0~2,600 min-1
IMPACT RATE 0~2,500 min-1
MAXIMUM TORQUE
(M14 HIGH TENSILE
BOLT) 150Nm
MOTOR Brushless DC Motor
OPERATING
TEMPERATURE 0°C to 40°C (32°F to 104°F)
OPERATING
HUMIDITY 80% RH or less
PRODUCT NAME MAX lithium ion battery charger
PRODUCT NO. JC928(CE)
INPUT
AC100-240V 50/60Hz 1.62-
0.68A
OUTPUT
DC 7.2/10.8/14.4V 7A
DC 18/21.6/25.2/28.8V 3.9A
WEIGHT 1.6kg (3.5lbs.)
OPERATING
TEMPERATURE 5°C to 40°C (41°F to 104°F)
OPERATING
HUMIDITY 80% RH or less
PJID143-2Lang.book 10 ページ ２０１０年６月２４日 木曜日 午後７時１７分