MAX PJID143 User Manual
Page 11
11
<Battery pack>
BATTERY CHARGER:
Use only an authorized Battery charger, MAX JC928
3. TECHNICAL DATA
1
NOISE
The typical A-weighted noise level deter-
mined according to EN60745-2-2:
• Sound pressure level (L
pA
):
98dB (A)
• Sound power level (L
WA
):
109dB (A)
• Uncertainty (K):
3dB (A)
2
VIBRATION
The vibration total value (tri-axial vector
sum) determined according to EN60745-2-2:
• Work mode: Impact tightening of fasteners
of the maximum capacity of the tool.
• Vibration emission value (a
h
):
9.6m/s
2
• Uncertainty (K):
1.5m/s
2
3
RADIATED EMISSION 30-1000 MHZ
Class B
4
Overvoltage category
5
Pollution degree
Pollution degree : degree 4 according to IEC
60664-1 (Both of PJID143 and JC928(CE)).
4. APPLICATIONS
Tightening and loosening of the following
fasteners.
• Screws
• Bolts
5. ABOUT PRODUCTION YEAR
This product bears production number in the
body.(Fig.A12) The two digits of the number
from left indicates the production year.
PRODUCT NAME
MAX lithium ion battery pack
PRODUCT NO.
JPL914
BATTERY TYPE
Lithium ion battery
NOMINAL VOLTAGE
DC14.4 V
NOMINAL CAPACITY
3.0 Ah (3,000 mAh)
CHARGING TIME
(USE WITH JC928(CE))
Quick charging - Approximately 30 minutes (Apprx. 90% of capacity) Full charg-
ing - Approximately 45 minutes at 25°C(77°F) (100% of capacity)
ACCESSORIES
Pack cap (For preventing short circuit)
WEIGHT
0.5 kg (1.1lbs.)
CHARGING TEMPERATURE
5°C to 40°C (41°F to 104°F)
OPERATING TEMPERATURE
0°C to 40°C (32°F to 104°F)
OPERATING HUMIDITY
80% RH or less
PRODUCT
Overvoltage category
PJID143 CORDLESS
BRUSHLESS IMPACT
DRIVER
Category 1
according to
IEC 60664-1
JC928(CE)
BATTERY
CHARGER
Category 2
according to
IEC 60664-1
(Example)
10826035D
Year 2010
PJID143-2Lang.book 11 ページ ２０１０年６月２４日 木曜日 午後７時１７分