Factory testing and customer witness testing, Field testing & service capabilities – MaxPower Corp GE SG Series 10-150kVA User Manual
Page 10
Factory Testing can include, but is not limited to:
•
Functional test of full parallel RPA system including transfers
to bypass, utility failure, EPO etc.
•
Full Functional test of parallel RPA system including master
fail and communications failure simulations
•
Steady state measurements from 0-100% load of voltage,
current, output voltage regulation, input/output power
factor, output voltage THD, input current THD, frequency.
•
Overload of full system up to 150%
•
100% utility failure with waveform capture
Factory Testing and Customer Witness Testing
•
0-100% step loads with waveform capture
•
0-100% bypass transfers with waveform captures
•
Output short circuit with waveform capture
•
Removal of module from the system with waveform capture
•
Inverter or power supply failure simulations
•
Full functional test of RPA output switchgear including
transfers in and out of main bypass mode
Field Testing & Service Capabilities
On-Site Services that include:
•
UPS Module Startup & Test
•
Battery Measurement & Monitoring
•
Load Bank Testing
•
Thermography Testing
•
Project Management
•
Site Commissioning Assistance
•
Repair, upgrade, retrofit
•
Site Audits & Assessments