Meriam 4150X ATEX I.S. Certified HART Communicator - Manual (Page 12)

8
Main Display
The Main display provides access to Online Setup, Offline Menu and to
4150 / 4150X configuration settings via the right hand Soft Key (Cfg).
1. Online Setup is described above in Turning On the 4150 / 4150X.
2. Offline Menu is selected to provide access to Offline Utilities
such as List / Show DOFs, List / Edit Configurations, and
Create Configurations. The number of DOFs installed (HART
device profiles) and the number of device Configurations stored
are also available on Offline Utilities screen. See the Offline
section of this manual for more information.
3. Cfg Soft Key is selected to configure 4150 / 4150X settings and
view unit information such as Model, Serial, and Firmware
numbers, DOFs installed and Configurations stored.
Configuration Settings
1 Users
Not currently used
2 Applications
Various applications are available here including Digital Poll (polling device addresses 0 – 15) and
other user and factory applications.
3
Lockouts
The HART Communicator can be programmed to lockout certain standard functions that a supervisor may
wish to control. The functions included are used to set up the 4150 / 4150X for normal use, change online
HART device configurations, create offline HART device configurations, update the installed DOFs list
(HART device profiles), or to update the Unit’s operating firmware. For example, locking out the Configs
feature makes the unit a read only HART communicator while locking out DOFs and Firmware prevents
unauthorized updates. The lockout can be limited to individual Lockout Details items or all Lockout Details
items can be locked out at one time.
To enable the lockout feature, press the “3” key or move the selection cursor
to the Lockouts menu
option on the Configuration screen (see below left). Choose the Lockouts selection by pressing the Chng
soft key. The 4150 / 4150X will enter the Lockout Enable / Disable Screen. The three choices and current
status information are provided (see below center):
Configuration Screen Lockout Enable / Disable Screen Lockout View Details Screen
Configuration #
Current Settings
1 Users
2 Applications
3 Lockouts
4 Clock/Timers
5 Other
Up Down Chng Back
Communicator #
1 Online Setup
2 Offline Menu
Device 0: *On-Line*
Rosemount
3051C
Fld Dev Rev 03
Dof Name 26060309
Up Down Select Cfg
Configuration #
Lockout Details
1 All
: Disabled
2 Setting : Enabled
3 DOFs : Disabled
4 Configs : Disabled
5 Firmware : Disabled
6 PV Prompt: Enabled
Up Down Chng Back
Configuration #
Lockouts
1 Lockout: Disable
2 PV Prompt: Disable
3 View Details
Up Down Chng Back
Configuration #
Current Settings
1 Users
2 Applications
3 Lockouts
4 Clock/Timers
5 Other
Up Down Chng Back