Meriam 4150X ATEX I.S. Certified HART Communicator - Manual (Page 36)

32
EC Declaration of Conformity
This is to declare, in accordance with Directive 94/9/EC, that the following product(s) are
designed and manufactured in accordance with Annex II of Directive 94/9/EC.
The manufacturer attests on their own responsibility that the apparatus has been constructed in accordance with the
principles of good engineering in safety matters, and that any routine verification and test required by Clause 27 of
EN 60079-0:2006 has been successfully completed.
Manufacturer:
Meriam Process Technologies, a Scott Fetzer Company
10920 Madison Avenue, Cleveland, Ohio 44102, USA
Product Description:
Multifunction Calibrator with HART Communication Terminals, Model 4150X series.
Certifying Agency:
UL International DEMKO A/S Testing & Certification (0539)
P.O. Box 514, Lyskaer 8, DK-2730 Herlev, Denmark
This Declaration is based on Compliance with the following Standards:
Regarding Hazardous Environments:
● EN 50020: Electrical apparatus for explosive gas atmospheres - Intrinsic safety 'i'
● EN 50014: Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
● EN 60079-0:2006 Electrical apparatus for explosive gas atmospheres – General requirements
● EN 60079-26: Special requirements for construction, test and marking of electrical apparatus of
equipment group
II, Category 1 G.
Regarding Electromagnetic Compatibility (EMC) for Handheld Class A device
Series 4150 hand held unit compliant with EMC Directive 89/336/EEC as amended by 92/31/EEC and
93/68/EEC
● EN 61326:1997 + A1:1998 + A2:2001 + A3:2003
● EN 60529: 2004: Degrees of Protection Provided by Enclosures (IP Code)
For and on behalf of Meriam,
Tim Lint
Standards Engineer
Doc. 9R000051 Rev A 28Jan2008