Meriam M2110L SMART LEVEL GAUGE - Manual (Page 4)

9R143 Dated 3/2011
2
SAFETY WARNINGS
The table below defines the safety symbols, signal words and corresponding safety messages used in the
manual to identify potential hazards and are intended to warn persons about hazards that could result in
personal injury or equipment damage.
This is the Read Instruction Manual symbol. This symbol indicates
h that you must read the instruction manual.
This is the Safety Alert symbol. This symbol indicates a WARNING.
Warnings alert you to actions that can cause personal injury or pose a
physical threat. Please read these carefully.
This is the Safety Glasses symbol. This symbol indicates that you must
wear approved safety glasses during the task.
This is the Safety Gloves symbol. This symbol indicates that you must
wear approved safety gloves during the task.
Indicates a potentially hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in minor or moderate injury.
Indicates information essential for proper product
installation, operation or maintenance.
Information in this document is subject to change without notice. Check the Meriam web site
(
www.meriam.com ) for the latest manual revision.
For customer assistance please call your local Meriam representative or Meriam di.0
Meriam Process Technologies
10920 Madison Avenue
Cleveland, Ohio 44102
Telephone: (216) 281-1100
Fax: (216) 281-0228
E-mail: [email protected]
Web: www.meriam.com