Meriam M4 Series Precision Calibrator Data Logger Manual - Manual (Page 23)

ZM4 Instruction Manual 9R87-B June 2012
23
Volts/mA Mode Setup
Figure 18: Volts/mA Mode Select Display
Reference Function
V Measure Selects the voltage measure mode.
I Measure Selects the current measure mode.
24V Source Selects the 24V loop source mode.
V Source Selects the voltage source mode. Brings up
menu (described on following page) to select
manual or automatic voltage simulation.
I Source Selects the current source mode. Brings up
menu (described on following page) to select
manual or automatic current simulation.
I Sink Selects the current sink mode. Brings up
menu (described on following page) to select
manual or automatic current sink. This is
also known as transmitter simulation mode.