Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 27)

Training Manual
Front Face Configuration – Single Loop Lab
3 - 9
Figure 3 .7.
PV Trend display
• Press F2 again. The Con 0 Tuning Parameter display appears. This display shows
Proportional Band, Reset Time and Derivative Time. You can use the /
buttons to select the parameter and then press the Enter key (F3 button). The
selected parameter database address and the value will be displayed at the bottom.
You can now use the / and / buttons now to change the value of the
selected parameter. Press the F3 button again when done. See next figure: The
Proportional band (database location C106) is selected for changes in this display.