Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 97)

Training Manual
Micro-Tools Lab
8 - 9
Figure 8.10.
Micro-Tools Create
a New Controller
Folder
• The Select Controller dialog box will be displayed next as shown below:
Figure 8.11.
Micro-Tools New
Controller
• Type a name for the controller we are adding in the Controller Name field. This
name has to match the controller name in Super32. In our example the controller
name is 53MC5000. If the name you found in Super32 was different, enter that
name here.
• Click on OK to accept the name and proceed.