Micromod MOD: 30ML Installation - Manual (Page 67)

MOD 30ML Multiloop Controller
MODULAR I/O CONNECTIONS
4.3.5 2001A Voltage Input (VCIM)
Make volt or millivolt connections as shown in Figure 4-7. Input specifications are:
ANALOG INPUT (VOLTAGE)
Range: (0-100%) ±10 Vdc, ±100 mVdc
Low limit: -11V, -110 mV
Upper limit: +11V, +110 mV
Input Resistance: 1 Megohm
Noise filter: 3 db at 5 Hz, 3 db at 3 Hz
Resolution: 16 bits
Sensitivity: 0.4mV, 4uV
Accuracy (calibrated): ±0.1% of span
Isolation: 250 Vrms
Max Survivable Input: ±300 Vdc or 250 Vac (Differential)
Common mode rejection: 100 db at 60 Hz minimum
Normal mode rejection: 40 db at 60 Hz minimum
Figure 4-7. Typical Connections for a 2001A Voltage Input Module
61