5 2011a form c mechanical relay outputs (wdom) – Micromod MOD: 30ML Installation User Manual
Page 78
Advertising
MOD 30ML Multiloop Controller
MODULAR I/O CONNECTIONS
4.4.5 2011A Form C Mechanical Relay Outputs (WDOM)
Make mechanical relay output connections as shown in Figure 4-15.
Wire rating: 600 V, -20°C +105°C UL, CSA approved. Output specifications are:
FORM C MECHANICAL RELAY OUTPUT
Configuration
Form C single relay
Power supply range
+ 5 VDC ±10%
Max Input Current
-10.0 mA DC
Contact load
3A at 60 VAC or 30 VDC
Contact resistance
0.10 ohms maximum
Isolation
250 Vrms (contacts to coil)
Current rating
3A per relay
Response time
10 msec
72
Advertising