Micromod MOD: 1750N Output holder for MOD 30ML - Manual (Page 29)

Output Holder Instructions
CONFIGURATION
4.4 CONNECTING RUNINIT FROM THE IF BLOCK
Option1: When using both RETURN and SENSE signals from the output holder:
To connect the RUNNIT attribute from the IF block, refer to the section select the
connector (multi segment or right angle) from the Algorithms Window and then click on a
blank area of the instrument document near the EX block.
Figure 4 .13. Connection Menu
Select Compound External from the menu as shown above.
Figure 4 .14. Connection Menu
Select the IF block from the menu and then click on the OK button.
4 -15