Mobi Technologies 70055 MobiCam Digital DL - Manual (Page 12)

CAMERA OPERATION MONITOR OPERATION
LCD On/Off
Press the Mode Button and hold for 3 seconds until the LCD screen is off. This
feature enables you to use the monitor as an audio only system allowing you to
conserve power.
To deactivate, press the Mode Button for 3 seconds.
Brightness Control
The brightness on the LCD screen can be adjusted by pressing the Mode button
2 times and using the “+ “& “–“ control buttons (fig. 2) until the desired level is
reached.
Voice Activation (VOX)
Voice Activation (VOX) mode allows your monitor to go to sleep mode when
there is no sound in the room. The monitor will automatically turn on when the
camera detects noise– subject to the factory preset sound level. This feature
allows you to conserve battery power.
NOTE: The Monitor will automatically switch to standby mode if no signal is received
from the Camera
To Activate / Deactivate: Press the Mode button3 times and the VOX icon will
appear. Your monitor will display “VOX” when this feature is turned on. Use the
“ + “ & “ - “ control buttons (fig. 2) to turn the function on or off.
10
Mode button