Mobi Technologies 70055 MobiCam Digital DL - Manual (Page 15)

TROUBLESHOOTING
Problem Solution
No Image
• Monitor or Camera has not been turned on.
• Check AC/DC connection
• Confirm power outlet is working properly.
• Battery is low (check Led indicator: Full Power
Green; Low Power - Red)
• Wrong Channel (Please note the monitor will
return to Channel 1 automatically after power
off)
• VOX mode is on, See Page 11
Only Sound is
Functioning
• LCD screen is Off, See Page 10
• Low Power (Check LED indicator: Full Power
Green; Low Power – Red)
Only Black & White
picture displayed
• Camera may have switched to “Infrared Night
Vision Mode,” See Page 12
Battery does not
recharge
• AC/DC adaptor has not been connected.
• Non-rechargeable battery has been used,
See Page 9
Camera will not link • Unit has not been switched on.
• AC/DC adaptor has not been connected.
• Check to make sure you are making contact
with the link button.
• Check to make sure you are selecting the
correct channel
Screen turns on and off • “VOX” mode is selected, when there is no noise
detected by the camera the screen and audio
turn off, See page 11
• Batteries are low, LED indicator will be red
Channels Keep Switching • Confirm status of scan mode, See page 10
13