Mobi Technologies 70008 Recam Remote Monitoring - Manual (Page 25)

- 25 -
broadcasting frame rate and your viewers will see an updated image right away when it has been captured.
Testing Camera Accessibility from the Internet
This procedure helps you to determine the reason your camera is not visible to your viewers from the Internet.
The testing procedure performs the following tasks:

Testing that the computer is connected to a network and that an Internet connection is enabled.

The program checks that the HTTP server for the selected camera is launched.

Next, the program checks that the Default Web Page is presented in the Server Folder. You can use the
Web Page Creation Wizard to create this web page.

After this step, the program tests that the Dynamic IP Service is enabled. Dynamic IP Service allows your
web camera to have a permanent address on the Internet.

Final step: the program sends requests to the www.getmobi.com server. The server pings back to the
computer with a test HTTP packet. If the server receives a valid answer from your computer, the test is
done successfully.
To perform the camera accessibility testing

Click Testing Accessibility from Internet from the Tools menu.

Select a camera to test and then press the Next button.
Part 8
Motion Detection
The Motion Detecting feature compares captured images and performs special tasks if a movement is detected.
With the Motion Detecting feature you can use ReCam to watch your home, office, children, pets or anything else.
It alerts you if something moves or changes in the monitored area.
To enable Motion Detection and set its properties, click Motion Detection from the Settings menu.
Click to select the Motion Detection Enabled check box to have ReCam to detect motion.