Mobi Technologies 70008 Recam Remote Monitoring - Manual (Page 34)

- 34 -
Part 11
Managing Program from Command-line
ReCam accepts commands from command-line. You can run the program with command-line parameters or send
commands to the already launched program.
Command-line
Parameter: Description:
/Q Terminates an already launched
ReCam.
Example: WebCam.exe /Q
/REMOTE_ON Enables Remote Access.
Example: WebCam.exe
/REMOTE_ON
/REMOTE_OFF Disables Remote Access.
Example: WebCam.exe
/REMOTE_OFF
/HTTP_ON Starts HTTP Server.
Example: WebCam.exe
/HTTP_ON
/HTTP_OFF Stops HTTP Server.
Example: WebCam.exe
/HTTP_OFF
/FTP_ON Starts FTP Uploading.
Example: WebCam.exe /FTP_ON
/FTP_OFF Stops FTP Uploading.
Example: WebCam.exe /FTP_OFF
/R_ON Starts Recording.
Example: WebCam.exe /R_ON
/R_OFF Stops Recording.
Example: WebCam.exe /R_OFF
/SNAPSHOTS_ON Starts Snapshots Creation.
Example: WebCam.exe
/SNAPSHOTS_ON
/SNAPSHOTS_OFF Stops Snapshots Creation.
Example: WebCam.exe
/SNAPSHOTS_OFF
/M_ON Starts Motion Detection.
Example: WebCam.exe /M_ON
/M_OFF Stops Motion Detection.
Example: WebCam.exe /M_OFF
/DEVICE Causes program to select video
device, which index is defined in
the next parameter. First device
has index 1.