5 additional analog input – Multichannel Systems Portable_ME-System Manual User Manual
Page 41
Appendix
33
8.5 Additional Analog Input
Portable ME-System with additional ANALOG OUTPUT for amplified analog data via 68-pin MCS standard
connector.
Rear Panel
Analog signals are splitted between the filter amplifier and the A / D converter. The additional analog
output on the rear panel of the Portable ME-System has the same pin layout as the output of a FA32
(32-channel filter amplifier). Please see pin layout below.
Pin Layout ANALOG OUTPUT
68-Pin MCS Standard Connector
Pin
1
GNDP
(power
ground)
Pin 2
GNDI (connected to GNDP)
Pin 3 –18
Analog output channels 1 - 16
Pin 19 – 34
Analog output channels 17 - 32
Pin 35 – 66
Not connected
Pin 67
Positive supply voltage output (+5.5 V to +9 V)
Pin 68
Negative voltage supply output (-5.5 V to -9 V)