Multichannel Systems PH01 Manual - Manual (Page 5)

PH01 Manual
3
1.3 Important Safety Advice
Warning: Make sure to read the following advice prior to install or to use the device and the
software. If you do not fulfill all requirements stated below, this may lead to malfunctions or
breakage of connected hardware, or even fatal injuries.
Warning: Obey always the rules of local regulations and laws. Only qualified personnel
should be allowed to perform laboratory work. Work according to good laboratory practice
to obtain best results and to minimize risks.
The product has been built to the state of the art and in accordance with recognized safety
engineering rules. The device may only
 be used for its intended purpose;
 be used when in a perfect condition.
 Improper use could lead to serious, even fatal injuries to the user or third parties and damage
to the device itself or other material damage.
Warning: The device and the software are not intended for medical uses and must not be
used on humans.
Malfunctions which could impair safety should be rectified immediately.
Requirements for the installation and operation
 The heating element produces heat and can get hot during operation.
 Do not touch the perfusion cannula during operation.
 Do not use the perfusion cannula for perfusion with flammable or aggressive (corrosive)
liquids.
 Do not store flammable materials nearby during operation.
 Check in regular intervals that the perfusion cannula does not overheat.