Multichannel Systems STG-Lite Manual - Manual (Page 17)

Use of STG-Lite
13
4.2 Stimulation Pattern: Waves
Select stimulation pattern "Wave". The main menu with default settings appears.
Channel 1
The option "Start" for channel 1 appears when no waves are downloaded. The option "Stop"
for channel 1 appears when program is running.
The currently selected values for frequency (Hz) and amplitude (mV) are displayed below
the "Start / Stop" button.
Signal
The signal can be delivered as rectangular waves, ramps or sine waves. You can switch between
the wave forms while the program is running.