Airlink101 APSUSB2 - Manual (Page 19)

18
9.2 Configuration
Click on Configuration to display the Configuration page.
Server Device
The Server Device page allows you to configure basic settings of the Print Server.
Server Name: You can rename the Print Server to a more user-friendly name or keep
the factory default name.
Location: You can make note of where the Print Server is located (optional).
Admin Contact: Name of the administrator to contact for help (optional).
Password: You can set a password for the Web Configuration Utility so only
authorized personnel can access and change the Print Server’s configuration.
LPT1, LPT2, and USB: You can rename the Print Server’s port name to a more user-
friendly name
Speed: Select the printer port’s speed.
PJL Printer: Choosing Yes will enable the support for Hewlett-Packard PJL (Printer Job
Language) standard for bi-directional printing. (Default is No).
Click Save to save and activate any configuration changes. Click Cancel to cancel the
changes.